Ceramic Metering Pump for Precise COD Reagent Dosing & Dispensing
Overview: Precision Ceramic Metering Pump for COD Reagent Filling
Our ceramic metering pump provides precise and repeatable liquid dosing for automated filling of pre-prepared COD reagents. Designed for water quality testing reagent production and laboratory liquid dispensing applications, the pump helps address two important challenges in COD reagent filling: maintaining consistent dosing volumes and ensuring suitable chemical compatibility when handling corrosive reagent formulations.
With chemically resistant wetted materials and positive-displacement dosing, the corrosive liquid pump provides a reliable liquid dispensing solution for environmental monitoring reagent manufacturers, water quality laboratories, and automated reagent production lines.

Corrosion-Resistant Materials for COD Reagent Dosing
Many dichromate-based COD testing methods use concentrated sulfuric acid together with potassium dichromate and other chemical reagents. These formulations create demanding requirements for the chemical compatibility of liquid-contact components in the dosing and filling system.
If pump wetted materials are not compatible with the reagent chemistry, prolonged exposure to strongly acidic or chemically aggressive media may contribute to material degradation, leakage, contamination, or changes in dosing performance.
To address these requirements, the wetted components of our ceramic pump can be configured with high-purity alumina ceramic and PTFE (Teflon). These materials provide high chemical resistance for many acidic and chemically aggressive media and can be evaluated for sulfuric-acid-containing COD reagent formulations according to concentration, temperature, and other operating conditions.
The ceramic and PTFE wetted structure helps reduce the risk of material interaction and supports stable pump operation during repeated reagent dosing and filling.

Why Precise Dosing Matters for COD Reagent Preparation
Chemical Oxygen Demand (COD) is a widely used parameter for assessing the amount of chemically oxidizable substances in water and wastewater. It is commonly applied in river water monitoring, industrial wastewater analysis, wastewater treatment plant operation, and environmental research.
In dichromate-based COD testing, the test result depends on defined experimental conditions, including reagent composition and concentration, solution acidity, reaction temperature and time, catalyst use, and other method-specific parameters. Therefore, consistent reagent preparation and accurate dosing are important for maintaining the reproducibility and reliability of COD testing.
During automated reagent filling, inconsistent dispensing volumes can result in variations in the amount of reagent provided to each package and may affect the consistency of subsequent testing procedures.
The chemical dosing ceramic pump provides precise and repeatable automatic dosing of defined liquid volumes. By delivering a consistent quantity of reagent during each filling cycle, it helps standardize COD reagent packaging and supports consistent reagent preparation for subsequent water quality testing.
Key Product Features & Application Values
Precise and Repeatable Dosing
The positive-displacement dosing mechanism provides controlled liquid delivery for defined-volume filling. It is suitable for applications where consistent reagent volume and repeatability are important.
High Chemical Resistance
The wetted components can be configured with alumina ceramic and PTFE, providing high resistance to many acidic and chemically aggressive media. Compatibility should be evaluated according to the specific COD reagent formulation, concentration, temperature, and operating conditions.
Reduced Risk of Reagent Contamination
Chemically resistant wetted materials help minimize material interaction and the risk of unwanted contamination during repeated reagent dispensing, supporting consistent reagent quality.
Long Service Life and Reduced Maintenance
Alumina ceramic provides high hardness and wear resistance, while the selected wetted materials are designed to withstand demanding chemical dosing environments. Proper material selection can help reduce component degradation and maintenance requirements.
Flexible Integration for Automated Filling
The ceramic metering pump can be integrated into automated reagent preparation and filling equipment for controlled, fixed-volume dosing. Pump configuration and dispensing volume can be customized according to the requirements of the filling system.

COD Reagent Dosing and Filling Applications
The ceramic metering pump can be used for precision dispensing of water quality testing and environmental monitoring reagents, including:
COD pre-prepared reagent filling
COD reagent factory production and packaging
Water quality laboratory reagent dispensing
Environmental monitoring reagent preparation
Industrial wastewater testing reagent filling
Automated chemical reagent dispensing systems
For applications involving sulfuric acid or other chemically aggressive COD reagents, the wetted materials and pump configuration should be selected according to the actual reagent composition and operating conditions.
Typical COD Reagent Filling Process
A typical automated COD reagent filling process can be configured as:
COD Reagent Preparation → Reagent Storage → Corrosion Resistant Ceramic Pump → Precision Dosing → Reagent Tube or Vial Filling → Sealing → Finished COD Test Reagent
The ceramic metering pump serves as the precision dosing component between reagent storage and the filling station, providing controlled liquid delivery for each dispensing cycle.


Why Choose MICRAVA Ceramic Metering Pump for COD Reagent Filling?
For COD reagent manufacturers and laboratory automation equipment developers, the dosing pump is an important component of the liquid handling system. The combination of precision dosing, repeatability, and chemically resistant wetted materials makes the ceramic metering pump suitable for evaluating demanding reagent filling applications.
The final pump configuration can be selected according to:
- COD reagent composition
- Sulfuric acid concentration
- Dispensing volume
- Required dosing accuracy
- Liquid viscosity
- Operating temperature
- Workng pressure
- Automation and PLC requirements
MICRAVA can evaluate the pump configuration and wetted materials according to the specific reagent and dispensing requirements.
Looking for a Precision Pump for COD Reagent Filling?
MICRAVA provides ceramic metering pumps for precision liquid dosing, reagent dispensing, and automated filling applications. If you are developing a COD reagent filling system or need a chemically resistant pump for acidic reagent dosing, contact us with your liquid composition, dispensing volume, required accuracy, and operating conditions.
Request a Quote for Your COD Reagent Dosing Application

